> 1/8 · Formula · 1/8 offroad · 1/10 200mm · 1/10 235mm

> Serpent 720 08 1/10th scale 200mm (#803008) - DISCONTINUED

> Description · News (102) · Specifications · Images (32) · Downloads (5) · Spares (182) · Optionals (80) · Setups (4)

Serpent 720 08 1/10th scale 200mm
Brand:
Serpent

Product Type:
Gas Cars > 1/10 200mm

Serpent is pleased to announce the release of the Ď08 spec of the European Championship winning Serpent 720 chassis. Maintaining the cars race winning geometry and already high specification, the 2008 version will now be supplied with a number of great option parts as standard.

Related products


> Description

Serpent 720 08 1/10th scale 200mm

Introduction

The new Serpent 720 '08 is a further refined version of the European B Championship winning chassis. Maintaining the cars race winning geometry and already high specification, the 2008 version will now be supplied with a number of great option parts as standard.


Serpent 720 08 1/10th scale 200mm

The Serpent 720 08 in Brief

The new main features of the Serpent 720 '08 are the a new black anodised chassis plate, front brass plate, new 0 and 1mm offset steering blocks, an aluminium radio plate X bracket and single piece orange anodised engine mount.

Apart from the options, some of the cars standard parts have also been improved such as the fuel tank, which is now made from a more crash resistant material, while the mounted AFL tank lid comes with the new improved rubber seal. Other improvements include the use of a smaller diameter flywheel and the inclusion of Serpentís new shock springs.


Serpent 720 08 - Rear end

Rear end

The rear end of the Serpent 720 '08 features strong 1-piece lower wishbones and fully adjustable uprights. As with all the wishbones on the car, the lower wishbones can be used on both the left and right sides, minimizing the number of spare parts needed to bring to the track. The rear upright features robust pivotball mounting points on the bottom and two upper camber link mounting holes for fine-tuning rear roll centre.


High Res Pic - Serpent 720 Rear anti-roll bar

Rear anti-roll bar

The rear anti-roll bar for the Serpent 720 '08 is ball-raced for extra precision. Stiffness is quickly and easily adjustable by changing the linkage mounting points on the lower wishbones or alternatively by changing the position of the ball joint pivot point on the roll bar itself.

To further stiffen the rear end of the car, we have created a distinctive S-shaped carbon brace which spans the two rear bearing blocks.


Serpent 720 08 - Rear upper wishbone

Rear upper wishbone

The Serpent 720 '08 continues to use an adjustable linkage as it has proved to be solid and lightweight, easily handling impacts, while offering improved and simple adjustment. The two inner mounting positions of each camber link offer an easy way to adjust camber rise.


High Res Pic - Serpent 720 Brake System

Braking system

The 720's braking system has been race proven and comes with a single ventilated brake disk to further improve braking performance and consistency.


Serpent 720 - New Fuel Tank

Fuel Tank

Serpent has included an improved version of their 75cc fuel tank in the 720 '08 which has been made from a newer stronger material. The milky white coloured tank will now have more resistance to shattering in the event of a heavy impact. The tank is top-mounted using rubber-covered aluminium mountings to isolate the tank from vibrations, and small body clips allow for quick & easy removal.

Improving on the concept that Serpent pioneered, their famous AFL fuel tank lid has been updated once more. Made from rubber, the new seal has been shaped to create a perfect seal around the opening of the tank and allowing the tank lid to close fully.


Serpent 720 08 -  Chassis Plate

Chassis Plate

The chassis plate has now been black anodised and features a machined recess to mount the supplied front brass plate, an option that helps remove snap oversteer and allows the car to corner faster and smoother. Made from high-grade 4mm thick aluminium, this chassis plate features countersunk screw holes along the bottom to ensure that no screws come in contact with the ground. The chassis also features chamfered edges to give greater clearance when going over curbs or when running low to the ground and just for looks we have anodised the chassis black.

To keep the centre-of-gravity as low and as centralised as possible, the chassis also houses the car's battery pack.


Serpent 720 08 - Rear body mount

Rear body mount

The simplicity of the rear end of the 720 means it is possible to remove the rear axles with only 6 screws. This configuration also makes it very easy to adjust the rear lower roll centre positions. Another great feature of the rear end is that the body mounting posts are no longer mounted directly to the carbon shock tower but are instead mounted to a flexible composite body mount plate. This reduces the chance of shock tower breakage even in large accidents.


Serpent 720 08 - Adjusting nut for pivot balls

Adjusting nut for pivot balls

These new adjusting nuts are made from Nylon and replace the previous aluminium nut with plastic insert which will not only makes assembly easier, it also reduces unsprung weight. Reducing the parts used at this point also reduces side play so it makes for a more precise handling car and because the material used is self-lubricating the movement of the pivot ball will remain smooth throughout use.

The car also comes supplied with orange anodised aluminium hex wheel adaptors that ensure that flex is eliminated in the drive train when under strain.


^ Front Gear Differential

Gear Differentials

The supplied gear differentials give smooth differential action and high durability, and gear slippage is non-existent due to the geared design. Performance and tuning characteristics are easily adjusted via gear oils of different thicknesses.

As an added extra, the Serpent 720 '08 comes with the previously optional front one way system as well the one way lock set to make it into a solid axle, ensuring your car will be ready for all conditions.


^ RCC Shock Absorbers

RCC Shock Absorbers

The RCC shock absorbers are the smoothest and easiest to build shocks ever designed. Machined from metal and unique in that the shock bodies only open on the bottom half, they are really simple to assemble. They come with a fixed piston and no longer use a diaphragm as with the previous shocks. The result is an ultra-smooth and air-free shock absorber thanks to the self-bleeding system incorporated into the design.

Another great benefit is that these shock absorbers come pre-assembled in the kit, so you need only add shock oil.


Serpent 720 08 -  Steering Blocks Evo2

Steering Blocks Evo 2

Supplied with the 720 '08 kit are these Evo2 steering blocks, which are supplied in 2 sets with 0 and 1mm kingpin angle. These new blocks have 1mm more offset compared to the standard versions, which gives the car a more smooth steering style. The 0-degree blocks work well on medium traction surfaces while the 1-degree blocks work better on low to medium level traction surfaces. However if you swap the left and right 1-degree blocks, the car will then work better in high grip tracks, actually reducing the effects of grip roll, while at the same time giving the car smoother, more consistent, cornering.


High Res Pic - Serpent 720 Gearbox

Lightweight transmission

The 720 '08 comes with a new smaller diameter flywheel but continues to use the same lightweight and well-tested transmission as in previous versions. Featuring a fine gear pitch and lightweight components, the result is better acceleration whilst the race-winning Centax-III clutch system is easily adjusted and performs brilliantly.


Alu X-Bracket & Single piece motor mount

Alu X-Bracket & Single piece motor mount

An aluminium radio plate X bracket also comes as standard, that not only looks great but also helps increase rigidity of the car, while finally, to ensure the engine mounting points are kept aligned, reducing stress on the crankcase, the 720-08 is supplied with the single piece orange anodised engine mount.


High Res pic - 710 Chassis stiffeners

Chassis Stiffeners

Rigidity is important in a modern day chassis, and this car is no exception. Sporting graphite side plates, a technology that Serpent pioneered, this car is ultra stiff and allows the shock absorbers and suspension components to work more effectively by reducing unwanted chassis flex.

The left chassis stiffener also doubles as the mounting point for the side belt tensioner.


Composite servo saver for the Serpent 720 with optional Ackerman inserts.

Servo Saver with adjustable Ackerman

A direct replacement of the original servo saver, this new version allows the user to easily adjust the cars Ackerman through the use of inserts thus eliminating the need to remove the entire assembly. Users can now find the most suitable setting by easily switching between the 4 different Ackerman settings now available to them.


^ Front Anti-roll bar

Front Anti-roll Bar

The front anti-roll bar uses the effective blade system. The mounting levers are used to adjust both upstop and downstop settings.


803145 - Brake disc Ventilated

Brake Disk

Precision machined disk brake, due to its excellent cooling characteristics, this ventilated brake disk allows smooth and precise braking. Its also very lightweight and is also very cool looking. Simple and effective stopping power.


^ Wheel Axles

Wheel Axles

The wheel axles are made from the highest quality steel. Sporting a threaded shaft to mount the wheel, these parts are built to last. The 720 '08 comes with 2 rear wheel axles made for dog bones whilst the front drive shafts make up part of the supplied CVD system.


^ Bearings

Bearings

Supplied with orange-sealed high-quality lightweight bearings throughout, the drive train is very efficient and runs very smoothly.


Serpent 720 07 - Driveshafts

Driveshafts

The 720 '08 comes supplied with the finest Spring Steel drive shafts capable of withstanding constant punishment; these shafts are ultra durable and very stiff allowing you to put all your power to the tarmac. The rear of this car uses dogbones while the front uses the supplied CVD shafts.


High Res pic - 710 Belts

Drive Belt System

The 720 '08 sports a now tried and tested drive ratio that makes it suitable for all tracks. The car comes with 3 completely new, narrow, low friction Kevlar belts.


High Res pic - 710 Alu pivot balls

Aluminium Pivot Balls

The ultra-lightweight but very strong aluminium pivot balls provide a huge weight saving over the steel versions without compromising strength, and we have provided them as standard.


Serpent 720 08 - Front bumper & Body mount

Front bumper & Body mount

The bumper plate is made from a high-quality composite that is impact resistant. This is all protected by the low profile foam bumper which can withstand huge impacts and still protect your car. The front bumper mount is also the mounting point for the front body posts.


Bumper LeMans type

Bumper LeMans type

As an added extra, the 720 '08 kit will also come with a Le Mans type bumper which can be used with both sedan body or GTP type body shell and can offer more protection than the standard bumper, due to its extra width.


Fastening Material

The car contains high-quality steel screws throughout.


High Res pic - Exhaust mounting spring

Exhaust mounting spring

The exhaust mount is a spring-type mounting wire that isolates vibrations. The wire mount is attached to the radio plate by a mounting post and secured in place with a set screw.


Serpent 720 08 - Nose block

Nose block

The nose block ensures that the downstop settings are not altered by impacts. This piece also doubles as a neat personal transponder mount.


Adjustment

The Serpent 720 has been designed with the highest level of competition in mind and is therefore fully adjustable. The racer can change numerous settings easily and effectively, including the suspension geometry. Upstops and downstops can be easily accessed and easily adjusted for optimum handling, as can the cars roll centers at both the front and rear of the car. Castor, toe, and camber are also easily adjusted.


Manuals

Serpent supplies a full-colour instruction manual to allow you to build your car with the greatest of ease. A separate brochure containing all exploded views and latest option parts is also supplied with the car.

Introduced originally with the Serpent 710, the Setup Book has now been improved and updated for the new Serpent 720 and contains set-up solutions, diagrams, and detailed theory. Also included is a Serpent 720 decal sheet and blank set-up sheet.

All Manuals are available to download as a PDF in the 'Downloads' section of this product page.


High Res Pic - Serpent 720 with Body

Cars Achievements

2007 - European Junior Champion
2007 - European 'B' Champion
2007 - Winternats Champion
2006 - US National Champion
2006 - Dutch EFRA GP Winner
2006 - European Championships TQ and Vice-Champion